Setup – wwwrouterloginet

What is the easiest method to configure wifi router ?http://router-netlogin.net/

  • Setting up wifi router can be difficult sometimes.
  • We have the easiest method to setup your router using www.routerlogin.net
  1. Unpack your router and plug it in the wall outlet.
  2. Once the power light is solid you can proceed to connect your wifi router to the back of the modem.
  3. Make sure you have the ethernet cable connected from the Internet slot of your router to the back of the modem.
  4. Once you have the ethernet cables connected, you can now open the router genie page www.routerlogin.net.
  5. Now you will see a setup wizard which will setup your router.
  6. If you do not see the setup wizard page, instead you get a username and password login screen then sign in using default username & password.
  7. Let the router process commands that you gave to setup your router. Do not interrupt the process by restarting or resetting wifi router.

Connect to the Network You can connect to the router’s network through a wired or WiFi connection.

If you set up your computer to use a static IP address, change the settings so that it uses Dynamic Host Configuration Protocol (DHCP).


Wired Connection

You can connect your computer to the router using an Ethernet cable and join the router’s local area network (LAN).

  • To connect your computer to the router with an Ethernet cable:

1. Make sure that the router has power (its Power LED is lit).

2. Connect an Ethernet cable to an Ethernet port on your computer.

3. Connect the other end of the Ethernet cable to one of the numbered Ethernet ports. Your computer connects to the local area network (LAN). A message might display on your computer page to notify you that an Ethernet cable is connected.


WiFi Connection

  • You can connect to the router’s WiFi network with Wi-Fi Protected Setup (WPS) or you can find and select the WiFi network.

To use WPS to connect to the WiFi network:

1. Make sure that the router has power (its Power LED is lit).

2. Check the WPS instructions for your computer or wireless device.

3. Press the WPS button on the router.

4. Within two minutes, on your computer or WiFi device, press its WPS button or follow its instructions for WPS connections. Your computer or wireless device connects to the WiFi network.

Cannot access mywifiext.net login page

Netgear Extenders are very advanced when it comes to performance. HD streaming onto devices or playing games, tasks like these can be handled easily.
setup netgear wifi
Follow these steps to access and setup your extender.
  1. You need to first press WPS button on your extender.
  2. Now press the WPS button on your Modem / router.
  3. This will connect your router and extender.
  4. Now you need to connect extender and type mywifiext.net to access the extender page.

How to use Internet Setup Wizard ?

To use the Internet Setup Wizard:

1. Launch a web browser from a computer or wireless device that is connected to the network.http://router-netlogin.net/

2. Enter http://www.routerlogin.net. A login window opens.

3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays.

4. Select ADVANCED > Setup Wizard.

5. Select the Yes radio button. If you select No, you are taken to the Internet Setup page.

6. Click the Next button.